Форма трубы низкий уровень шума электродвигатель занавеса легко установить стойло защиты двойной вал Preffered стоп положение затвора умный дом

Features:
STOP POSITION:It will give you a preferred stop position for your electric curtain
FREQUENCY:433MHZ control, docking various wireless remote control and wireless panel
UNIVERSAL:Suitable for blinds, Roman curtains, honeycomb curtains, ceiling curtains and facade Roman curtains
COPPER CORE:Adopt copper core movement, it is durable and practical
LOW NOISE:Motor running noise is low, will not disturb your normal work and sleep

Specification
Color: green
Material: ABS, copper
Twisting force: 0.8N
Frequency: 433MHZ
Voltage: 12V
Wattage: 10W
Loading: about 3kg

Package include:
1pc x electric curtain motor

Notice:
Due to the light and screen difference, the item's color may be slightly different from the pictures.
Please allow 0.5-2cm differences due to manual measurement.

Safty Note:
1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by children without supervision.
4. If the supply is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
5. WARNING: the drive shall be disconnected from its power source during cleaning, maintenance and when replacing parts.
6. The instructions shall state that the A-weighted emission sound pressure level of the drive is equal to or less than 70 dB(A), e.g. by writing LpA ≤ 70 dB(A).
7. The mass and the dimension of the driven part shall be compatible with the rated torque and rated operating time.
8. The type of driven part the drive is intended for.
9. WARNING: Important safety instructions. It is important for the safety of persons to follow these instructions.Save these instructions.
10. Do not allow children to play with fixed controls. Keep remote controls away from children.
11. Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary.
12. Watch the moving shutter and keep people away until the shutter is completely closed.
13. WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.
14. Before installing the drive, remove any unnecessary cords and disable any equipment not needed for powered operation.

Setting Notice:
1. Don't operate motors when low voltage alarm.
2. In the setup operation, the motor will run for hint, please do the step after the hint.
3. Set the limit position：
①After the upper / lower limit setting, and the upper / lower limit positin can’t at the same position.
②After the limit setting, with power off and memory function.
③Limit delete will clear all limit memory.
④It will exit limit setting when program there is no operation for 2 minutes.
4. When the motor running without any operation, the maximum running time is 6 minutes, it will stop
automatically.
5. If the emitter lost, please setting up again with new emitter.
6. One motor can store maximum 20 channels; after fully stored, if pair new channels, only the last one will
be covered circularly
Cautions:
1. Do not expose motor to humid, damp or extreme temperature conditions.
2. Do not drill into motor.
3. Do not cut the antenna and keep it clear from metal objects.
4. Do not allow children to play with this device.
5. If power cable or connector is damaged, do not use.
6. Ensure correct crown and drive adaptor are used.
7. Ensure power cable and aerial is clear and protected from moving parts.
8. Cable routed through walls shall be properly isolated.
9. Motor is to be mounted in horizontal position only.
10. Before installation, remove unnecessary cords and disable equipment not needed for powered operation.
11. Installation and programming to be performed by a qualified professional, use or modification outside the scope of this instruction may void warranty.