Leadshine легкий серво комплект включает 573HBM10 573S09 Серводвигатель и HBS507 HBS57 сервопривод и 3 м кабель

Описание

Notice:

We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.

573S09-EC + HBS57 +Encoder cable Servo Sets

1 set include:

1> One 128 oz-in (1.0 NM) Leadshine 573S09-EC-1000 servo motor.

2> One Leadshine HBS57 hybrid servo drive with 18-48 VDC input and 8.0A peak current

3> One 9.8-foot (3-meter) CABLE-ENCODER-03 encoder extension cable

Special notice:

573S09-EC now has been updated into 573HBM10, and you will receive the 573HBM10, the technical data stay same.

HBS57 now has been updated into HBS507, and you will receive the HBS507, the technical data stay same.

Leadshine 573S09-EC-1000 is a 128 oz-in (0.9 Nm) 3-phase NEMA 23 stepper motor with 4,000 CPR (1,000-line) incremental encoder (A , A-, B , B- signals). It is built with high quality material and can move smoothly with very low noise and heating.

When driven by Leadshine HBS57 easy servo drive (closed loop stepper drive), the position loop between 573S20-EC and the drive is closed. You will never get stall or loss of steps, often seen in open loop stepper systems. Because there is no torque resolution needed like in open loop stepper systems, you can much better high-speed performance than open loop stepper systems by increasing up to 30%.

Leadshine 573S20-EC can also driven by regular open loop 3-phase stepper drives and feed back encoder signals to motion controllers, or external devices.

Features:

3-Phase NEMA 23 frame size

128 oz-in (0.9 Nm) holding torque

Speed range: 0-3,000 RPM

Integrated 1,000-line (4,000 CPR) Incremental Encoder with A , A-, B , and B- signals

0.315 inch (8 mm) shaft size

Quiet movement and low motor heating

Specifications:

Model:573S09-EC

Frame Size:NEMA 23

Phase:3

Step Angle:1.2°

Number of Leads:3

Holding Torque:128.0 Oz-In

Encoder Resolution:4,000 CPR

Shaft Size:0.315 inch

Phase Current:5.8 A

Inductance:0.72 mH

Resistance:0.35 Ohm

Rotor Inertia:0.00395 oz-in-sec2

Length:2.87 inches

Weight:1.65 lbs

Mechanical Specifications (unit: mm):

Leadshine легкий серво комплект включает 573HBM10 573S09 Серводвигатель и HBS507 HBS57 сервопривод и 3 м кабель

Matching Drive:

HBS57 (Easy Servo Drive)

3DM683 (Stepper Drive)

3DM683-HV (Stepper Drive)

Note:

when driven by an leadshine offered Leadshine 3-phase hybrid servo drive or open-loop 3-phase stepper drives, you can run this 3-phasemotor like a 2-phase stepper motor. There is no need to reconfigure your control system configuration. When moving in full step mode, this 3-phase stepper motor will move 200 steps per resolution, same as a 2-phase stepper motor.